Usuário (não registrado)LOGIN ASSINE JÁ!


www.dicionariotecnico.com

Disponível no Google Play

Resultados da busca para "polytetrafluorethylene"


a) Traduções técnicas inglês para português

(Substantivo)

Sigla em inglês PTFE (polytetrafluorethylene)

Sigla em português PTFE

Termos alternativos - Inglês Teflon;

Outras denominações em Português Teflon

Significado

Fluoropolímero sintético do tetrafluoretileno com diversas aplicações. Também é conhecido pelo nome comercial Teflon, marca registrada da DuPont.

Meaning

Synthetic fluoropolymer of tetrafluoroethylene that finds numerous applications. It is also known by the DuPont brand name Teflon. (http://en.wikipedia.org...)

Exemplos de tradução

The surface of a hydrophobic polymer, such as polymethylmethacrylate, polytetrafluorethylene. polyethylene terephthalate, and polycarbonate, may also be rendered hydrophilic by means of ionic radiation in the presence of a reactive gas, as described by Kim et al (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

A superfície de um polímero hidrófobo, tal como polimetilmetacrilato, politetrafluoretileno. tereftalato de polietileno e policarbonato, também pode ser transformada em hidrófila por meio de radiação iônica na presença de um gás reativo, conforme descrito por Kim e col. (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

   
Frases traduzidas contendo "polytetrafluorethylene"

With the objective of validating the field use of the foam collector with acid and polytetrafluorethylene. which captures volatilized ammonia and quantify this loss when using sources and application forms of nitrogen (N) in pastures, 2 experiments were realized.

Com objetivo de validar o uso no campo do coletor de espuma com ácido e politetrafluoroetileno que capta amônia volatilizada e quantificar essa perda oriunda de fontes e formas de aplicação de nitrogênio (N) em pastagens, realizou-se 2 experimentos.

The surface of a hydrophobic polymer, such as polymethylmethacrylate, polytetrafluorethylene. polyethylene terephthalate, and polycarbonate, may also be rendered hydrophilic by means of ionic radiation in the presence of a reactive gas, as described by Kim et al (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

A superfície de um polímero hidrófobo, tal como polimetilmetacrilato, politetrafluoretileno, tereftalato de polietileno e policarbonato, também pode ser transformada em hidrófila por meio de radiação iônica na presença de um gás reativo, conforme descrito por Kim e col. (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

The main objective of this work is to study the influence the process parameters on the microstructure and the mechanical properties of components manufactured by compaction at room temperature and sintering of polytetrafluorethylene (PTFE).

Este trabalho apresenta um estudo dos processos de prensagem e sinterização do politetrafluoretileno (PTFE) com o objetivo principal de investigar a influência dos parâmetros desses processos na microestrutura e nas propriedades mecânicas do material após sinterização.

The surface of a hydrophobic polymer, such as polymethylmethacrylate, polytetrafluorethylene. polyethylene terephthalate, and polycarbonate, may also be rendered hydrophilic by means of ionic radiation in the presence of a reactive gas, as described by Kim et al (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

A superfície de um polímero hidrófobo, tal como polimetilmetacrilato, politetrafluoretileno, tereftalato de polietileno e policarbonato, também pode ser transformada em hidrófila por meio de radiação iônica na presença de um gás reativo, conforme descrito por Kim e col. (20,3 ECI Conference on Heat Exchanger Fouling and Cleaning: Fundamentals and Applications , Vol.

... charcoal to obtain a concentrate (Aza-A 60) containing 60% azadirachtin A (aza-A). In the first study, aza- A (the major triterpenoid) was isolated by countercurrent chromatography (CCC) fitted with polytetrafluorethylene coil (1,6 mL volume) using the biphasic solvent system n- hexane:butanol:methanol:water (l:0,9:l:0,9,v/v) by injecting 7,0 mg of Aza-A 60 and eluting with 2mL/min, in the head to tail direction. Thir...

...epetindo-se 3 vezes e obtendo-se o extrato concentrado enriquecido com 60% de azadiractina A (Aza- A 60). Primeiramente, isolou-se azadiractina A através da injeção de 7,0 mg de Aza-A 60 no cromatógrafo em contracorrente (CCC), com coluna de politetrafluoretileno e 1,6mL de capacidade, utilizando-se o sistema bifásico hexano:butanol:metanol:água (1,0.9,1:0,9, v/v) eluído a 2mL/min, na direção cabeça-cauda. Coletaram-se 30 frações recuperando-se 95% do material injetado. Após monitoramento por cromatograf...

...d to perform the experimental samples of the two research parts. In the first part, the resin composite, Z-1,0 and P-60, were used to seal the SAH, and the filling materials used were cotton pellets, polytetrafluorethylene tape and gutta-percha. The experimental samples were cast in NI-Cr metal alloy a ceramic layer with 2,0 mm of diameter was applied on the surface where is placed the SAH. The ceramic surface o...

...componentes protéticos do tipo UCLA anti-rotacional (Biomet 3i) para implantes de hexágono externo com plataforma de 5,0 mm de diâmetro. Na primeira parte do estudo, foram testadas as resinas compostas fotopolimerizáveis Z1,0 e P60 (3M – ESPE) para selar o OAP, e como materiais de obturação do canal foram utilizados algodão hidrófilo, fita de politetrafluoretileno (fita veda rosca) e guta-percha. Os corpos-de-prova foram fundidos em liga de NiCr, e uma camada de 2,0 mm de espessura de porcelana feldspática...

...). Mice C57BL/6, consisting of 5 distinct groups had been used of the dorsal subcutaneous implantation (1cm2): 15 implanted with NLB; 15 with surgical GLOVE (unnatural latex); 15 with ePTFE (expanded polytetrafluorethylene - synthetic implantation) and 15 without implant (SHAM). The activity of the implants was evaluated in 2nd, 7th and 14th days. Five animals for group each time were sacrificed for biopsies with 4mm p...

...es e à cicatrização normal (SHAM). Foram utilizados camundongos C57BL/6, constituído de 5 grupos distintos pelo implante subcutâneo dorsal (1cm2): 15 implantados com BLN; 15-LUVA cirúrgica (látex desnaturado); 15-ePTFE (PoliTetraFluorEtileno Expandido - implante sintético) e 15-SHAM. A atividade dos implantes foi avaliada no 2º, 7º e 14º dias, sacrificando 5 animais/grupo/tempo para biópsias (punch-4mm). Toda pele da área implantada foi recortada e fotografada. As amostras foram submetidas a estud...

...ter template for creating multi-layered piezoelectrets with open-tubular channels. This type of voided structure have been initially produced by laminating fluoroethylene-propylene (FEP) films with a polytetrafluorethylene (PTFE) template in between although the template was discarded after lamination, creating residual waste. With the replacement of the PTFE template by water in the production step of the new piezoele...

...mo selagem e template de água para criar piezoeletretos com canais tubulares abertos. Este tipo de estrutura vazada foi inicialmente produzida pela laminação de filmes de etileno propileno fluorado (FEP) com o template de politetrafluoretileno (PTFE) entre eles, sendo o template descartado após a laminação, gerando resíduos. Com a substituição do template de PTFE pela água na etapa de produção dos novos piezoeletretos, foi possível eliminar o descarte de resíduos sólidos ao mesmo tempo em que um tratam...


 
CLIQUE AQUI